Building Walls Straight Saint-Jérôme QC

The tighter the line, the straighter the wall will be in Saint-Jérôme. If the line isn't pulled tightly enough, it'll sag and the wall will be out of level. Taking the sag out of the line on a long wall (40 feet or more), it may be impossible to remove all sag in the line just by pulling it.

Gestion Christian Brassard Inc
(450) 623-0085
415 Rue Blouin
Saint-Eustache, QC
 
Construction Ultra
(450) 378-9600
1037, Chemin Denison Ouest
Granby, QC
 
Fedelenergie Inc
(514) 592-4557
276 rue Baffin
Dollard-Des-Ormeaux, QC
 
Construction Afcon
(514) 592-4557
276, Rue Baffin
Dollard-Des-Ormeaux, QC
 
Groupe Gje Lavoie Inc
(514) 684-5584
4025 boul des Sources
Dollard-Des-Ormeaux, QC
 
Arri Construction Inc
(450) 778-3820
3875, Impasse Berard
Saint-Hyacinthe, QC
 
Construction Gilles Guertin Inc
(819) 539-6100
4975 11E Avenue
Shawinigan, QC
 
Oakwood Construction Canada
(514) 696-8678
10 rue Fleming
Dollard-Des-Ormeaux, QC
 
Construction R Desgroseilliers
(450) 698-0329
274, Rue Birch
Chateauguay, QC
 
Construction Arctic Beluga Inc
(819) 535-2020
4953 Boulevard Royal
Shawinigan, QC
 

Building Walls Straight

Provided By:

Source: Masonry Construction
Publication date: February 1, 1989

By Paul Halseide

Abstract: A wall ends up crooked, out of level, or out of plumb. Why? Most of the time it's because the mason didn't use a line or didn't use it properly.CORNER POLES AND LEADSTo build long, straight walls, you have two options: you can build corner leads and tie the line to the leads, or you can attach corner poles to the building structure and tie the line to the corner poles.ATTACHING THE LINEOnce the corner poles or leads are up, the line can be pulled. Attach the line to corner poles with line blocks, making sure both ends of the line are at the same course height marked on each pole. When leads are used, you have several options for attaching the line. You can use line blocks, line pins, nails, or line stretchers.PULLING THE LINEUsually the mason on the right pulls the line taut. He should pull it as tightly as he safely can. The tighter the line, the straighter the wall will be. If the line isn't pulled tightly enough, it'll sag and the wall will be out of level.TAKING THE SAG OUT OF THE LINEOn a long wall (40 feet or more), it may be impossible to remove all sag in the line just by pulling it. To eliminate sag and prevent the wind from blowing the line, set one or more masonry units in the middle of the wall to hold up the line. These masonry units are called trigs. Use a metal clip called a twig to hold the line to the trig.LAYING MASONRY UNITSOnce the line is pulled tight.

Click here to read full article from Masonry Construction