Building Walls Straight Winnipeg MB

The tighter the line, the straighter the wall will be in Winnipeg. If the line isn't pulled tightly enough, it'll sag and the wall will be out of level. Taking the sag out of the line on a long wall (40 feet or more), it may be impossible to remove all sag in the line just by pulling it.

alliance painting and decorating
(204) 451-6752
67 fifth ave
winnipeg , MB
 
Trained Eye Home Inspection
204-291-5358
Winnipeg, MB

Data Provided by:
B. Rocke Landscaping
(204) 999-2512
Winnipeg, MB

Data Provided by:
B. Rocke Landscaping
(204) 999-2512
Winnipeg, MB

Data Provided by:
alliance painting and decorating
(204) 451-6752
67 fifth ave
winnipeg , MB
 
House Review Residential Inspection Services
(204) 253-4076
Winnipeg, MB

Data Provided by:
New Look Gardens & Landscaping
(204) 724-3430
Forest Station, MB

Data Provided by:
Trained Eye Home Inspection
204-291-5358
Winnipeg, MB

Data Provided by:
House Review Residential Inspection Services
(204) 253-4076
Winnipeg, MB

Data Provided by:
New Look Gardens & Landscaping
(204) 724-3430
Forest Station, MB

Data Provided by:
Data Provided by:

Building Walls Straight

Provided By:

Source: Masonry Construction
Publication date: February 1, 1989

By Paul Halseide

Abstract: A wall ends up crooked, out of level, or out of plumb. Why? Most of the time it's because the mason didn't use a line or didn't use it properly.CORNER POLES AND LEADSTo build long, straight walls, you have two options: you can build corner leads and tie the line to the leads, or you can attach corner poles to the building structure and tie the line to the corner poles.ATTACHING THE LINEOnce the corner poles or leads are up, the line can be pulled. Attach the line to corner poles with line blocks, making sure both ends of the line are at the same course height marked on each pole. When leads are used, you have several options for attaching the line. You can use line blocks, line pins, nails, or line stretchers.PULLING THE LINEUsually the mason on the right pulls the line taut. He should pull it as tightly as he safely can. The tighter the line, the straighter the wall will be. If the line isn't pulled tightly enough, it'll sag and the wall will be out of level.TAKING THE SAG OUT OF THE LINEOn a long wall (40 feet or more), it may be impossible to remove all sag in the line just by pulling it. To eliminate sag and prevent the wind from blowing the line, set one or more masonry units in the middle of the wall to hold up the line. These masonry units are called trigs. Use a metal clip called a twig to hold the line to the trig.LAYING MASONRY UNITSOnce the line is pulled tight.

Click here to read full article from Masonry Construction