Construction Materials St. John's NL

Considered the "Cadillac" of flashing materials, stainless steel and cooper match the durability and longevity masonry provides. Both types of metal flashing are often specified for masonry buildings designed to last 50 to 100 years or more, and offer several advantages over other flashing materials: Durability; UV-resistance; Installation at any temperature; Compatibility with sealant and caulks; Corrosion resistance.

Triple Class Painters
(709) 699-3029
St.John's
St. John's, NL
 
Tony McDonald Painting
(709) 757-3564
10 Austin St, Suite 6
St. John's, NL
 
Brush & Trowel Ltd
(709) 745-2644
1 Gary Dr
St. John's, NL
 
Tony McDonald Painting
(709) 757-3564
10 Austin St, Suite 6
St. John's, NL
 
Triple Class Painters
(709) 699-3029
St.John's
St. John's, NL
 
Interior Specialties Ltd
(709) 738-3228
3 Church Hill
St. John's, NL
 
Economy Drywall Supplies
(709) 364-9785
50 Sagona Av
St. John's, NL
 
Brush & Trowel Ltd
(709) 745-2644
1 Gary Dr
St. John's, NL
 
Economy Drywall Supplies
(709) 364-9785
50 Sagona Av
St. John's, NL
 
Interior Specialties Ltd
(709) 738-3228
3 Church Hill
St. John's, NL
 

Construction Materials

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: April 15, 2001

By Christine A. Subasic

Abstract:

What to consider when specifying and installing the most durable of flashings.

Considered the "Cadillac" of flashing materials, stainless steel and cooper match the durability and longevity masonry provides. Both types of metal flashing are often specified for masonry buildings designed to last 50 to 100 years or more, and offer several advantages over other flashing materials: Durability; UV-resistance; Installation at any temperature; Compatibility with sealant and caulks; Corrosion resistance.

Stainless Steel

Stainless steel is a hard, durable material. Used as a flashing material in masonry buildings, stainless steel should meet the requirements of ASTM A 167 "Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip, Type 304."

Most architects specify stainless steel flashing to be "dead-soft", indicating a more malleable composition.

Stainless steel is generally more reflective than copper. Today, stainless steel flashing is usually lower in cost than copper flashing of equivalent weight. Prices quoted range from $2.50 to $3.35 per linear foot for 12-inch-wide Type 304, 26-guage stainless steel with two bends and a drip.

Copper

Copper for use in masonry should conform to ASTM B 370 "Specification for Copper Sheet and Strip for Building Construction, soft-tempered." Lead-coated copper should meet the requirements ...

Click here to read full article from Masonry Construction