Lateral Bracing Walls for Sloped Roofs Saint John NB

Some designs require that sloped open web joist roof systems be laterally braced to a concrete masonry fire wall in Saint John. When non-bearing masonry walls need to be braced by steel joists that are sloped, prefabricated metal weld plates should be embedded into the masonry walls.

Miramichi Timber Frames Inc.
(506) 773-8993
74 Thornycroft Street
Miramichi, NB
 
Mike Cunningham Excavation LTD.
(506) 977-1122
p.o box 24012
saint john, NB
 
Anthony Concrete Finishing Ltd
(506) 640-3130
Saint John, NB
 
Fcs Flooring & Concrete Solutions Inc
(506) 635-0510
Saint John, NB
 
Fundy Drilling & Sawing
(506) 635-0510
Saint John, NB
 
AJ&Sons Construction Ltd.
(506) 836-7338
1850 Route 420 Hwy
Red Bank, NB
 
Martell Home Builders
(877) 897-8812
Moncton, NB

Data Provided by:
Schurman Concrete Limited
(506) 632-6044
Saint John, NB
 
Rob's Flooring & Concrete
(506) 696-6066
Saint John, NB
 
Data Provided by:

Lateral Bracing Walls for Sloped Roofs

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: April 1, 2007

By Walter A. Laska

Some designs require that sloped open web joist roof systems be laterally braced to a concrete masonry fire wall. When non-bearing masonry walls need to be braced by steel joists that are sloped, prefabricated metal weld plates should be embedded into the masonry walls. The concrete masonry cell directly behind the welding plate should be solidly filled with mortar or grout.

Weld plates, such as those manufactured by Trico Masonry Products, must be installed to align with the steel joists. The metal weld plates should be fabricated and delivered to the jobsite prior to the beginning of construction. The weld plates can be adjusted easily, assuring correct installation.

Lateral bracing of the wall can be achieved by extending the horizontal bridging angles and welding them to the welding plates secured to the wall. The extended angle should be aligned with the horizontal bridging to prevent crimping in the joist chords due to pressure induced by wind loads.

Extending the horizontal bridging and connecting it to the masonry wall permit lateral loads to be transferred into the roof diaphragm, which braces the wall against wind loads. This arrangement eliminates the need for columns, piers, pilasters, or cross walls for lateral bracing if the wall is designed and constructed within height limitations allowed by code.

Click here to read full article from Masonry Construction